Stellar Access Point 1360

Description

Radio Specification
• AP type: Outdoor, integrated three radios
• Tri Radio, 5 GHz 802.11ax 4×4:4 and 2.4 GHz 802.11ax 2×2:2 and dedicated scanning radio
¬ 5 GHz: 4×4:4 up to 2.4Gbps wireless data rate to individual 4SS HE80 802.11ax client devices. 2.4 GHz: 2×2:2 up to 573 Mbps wireless data rate to individual 2SS HE40 802.11ax client devic-es.
• Supported frequency bands (country-specific restrictions apply):
¬ 2.400 to 2.4835 GHz
¬ 5.150 to 5.250 GHz
¬ 5.250 to 5.350 GHz
¬ 5.470 to 5.725 GHz
¬ 5.725 to 5.850 GHz
• Available channels: Dependent on configured regulatory domain
• Brazil: Frequency band 5.150 to 5.350 GHz is disabled. Maximum transmit power: 30dBm on
2.4GHz, 30dBm on 5GHz
• Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
¬ 25dBm on 2.4GHz (22dBm per chain)
¬ 27dBm on 5GHz (21dBm per chain)
• DFA (Dynamic Frequency Adjustment) optimizes available channels and provides proper transmission power
• Short guard interval for 20-MHz, 40-MHz, 80-MHz, and 160(80+80)MHz channels
• Transmit beam forming (TxBF) for increased signal reliability and range
• 802.11n/ac packet aggregation: Aggregated Mac Protocol Data Unit (A-MPDU), Aggregated Mac Service Data Unit (A-MSDU)
• Supported data rates (Mbps):
¬ 802.11b: 1, 2, 5.5, 11
¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
¬ 802.11n(2.4GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
¬ 802.11n(5GHz): 6.5 to 600 (MCS0 to MCS31, HT20 to HT40)
¬ 802.11ac: 6.5 to 1733 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT80; NSS=2, VHT160(80+80))
¬ 802.11ax(2.4GHz): 3.6 to 573 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
¬ 802.11ax(5GHz): 3.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE80; NSS=2,VHT160(80+80))
• Supported modulation types:
¬ 802.11b: BPSK, QPSK, CCK
¬ 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
¬ 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11ac very high throughput (VHT) support: VHT 20/40/80/160(80+80)
• 802.11ax high efficiency (HE) support: HE 20/40/80/160(80+80)
• Advanced Cellular Coexistence (ACC)
¬ Minimizes interference from 3G/4G cellular networks, distrib-uted antenna systems, and commercial small cell/ femtocell equipment
• Full band 1×1 radio with integrated antenna, dedicated for scanning
• Bluetooth Low Energy (BLE) 5.1/ Zigbee radio, integrated antenna
¬ Bluetooth 5: up to 18dBm transmit power (class 1) and -93dBm receive sensitivity
¬ Zigbee: up to 18dBm transmit power and -102dBm receive sensitivity
¬ Integrated vertically polarized omnidirectional antenna with peak gain of 4.64dBi for AP1361, 3.3dBi for AP1361D and AP1362

Interfaces
• 1x 10/100/1000/2500 Mbps IEEE 802.3 compliant autosensing (RJ-45) uplink port, ENET0, Power over Ethernet (PoE) 802.3at/bt compliant
• 1x 10/100/1000 Mbps IEEE 802.3 compliant auto-sensing (RJ-45) downlink port, ENET1, PoE PSE output up to 802.3at power dependent on input PoE
• 1x SFP port
• 1x USB 2.0 Type C (5V, 1A)
• Reset button: Factory reset

Visual Indicators (7 LEDs)
• For system and radio status
¬ SYS ON: Power on and system running
¬ SYS Flashing: Bootloader-OS loading or upgrading
¬ 2.4G ON: 2.4GHz SSID created and running
¬ 5G ON: 5GHz SSID created and running
¬ ENET0 ON: Ethernet0 link UP
¬ ENET1 ON: Ethernet1 link UP
¬ SFP ON: SFP link UP
¬ PSE ON: PSE Enabled

Security
• Integrated Trusted Platform Module (TPM 2.0) for secure storage of credentials and keys
• 802.11i, WPA2, WPA3-Enterprise with CNSA Option, Personal(SAE), Enhanced Open(OWE)
• 802.1X
• WEP, Advanced Encryption Standard (AES), Temporal Key Integrity Protocol (TKIP)
• Firewall: ACL, wIPS/wIDS and DPI application policy enforcement with OmniVista™
• Portal page authentication

Antenna
• AP1361: 2×2:2 @ 2.4GHz, 4×4:4 @ 5GHz
¬ Integrated omni antennas (H and V polarized) with maximum antenna gain of 4.85dBi in 2.4 GHz and 6.48dBi in 5 GHz
¬ AP1361D: 2×2:2 @ 2.4GHz, 4×4:4 @ 5GHzIntegrated directional antennas (H80°x V80°) with maximum antenna gain of 7.5dBi in 2.4 GHz and 7.4dBi in 5 GHz
• AP1362: 2×2:2 @ 2.4GHz, 4×4:4 @ 5GHz
¬ 6 N-Type external antenna connectors, integrated 6KA lightning protection, not require additional lightning arrester.
¬ ANT0-ANT3 are 5GHz antenna connectors, ANT4-ANT5 are 2.4GHz antenna connectors

Receive sensitivity (per chain)
2.4 GHz 5 GHz
1 Mbps -99
11 Mbps -89
6 Mbps -93 -91
54 Mbps -76 -74
HT20(MCS 0/8) -92 -90
HT20(MCS 7/15) -74 -72
HT40(MCS 0/8) -91 -88
HT40(MCS 7/15) -74 -70
VHT20(MCS 0) -92 -90
VHT20(MCS 8) -70 -68
VHT40(MCS 0) -91 -88
VHT40(MCS 9) -68 -64
VHT80(MCS0) -86
VHT80(MCS9) -61
HE20(MC0) -94 -92
HE20(MC11) -63 -62
HE40(MC0) -91 -89
HE40(MC11) -62 -60
HE80(MC0) -87
HE80(MC11) -58

Maximum Transmit power (per chain)
2.4 GHz 5 GHz
1 Mbps 22 dBm
11 Mbps 22 dBm
6 Mbps 22 dBm 21 dBm
54 Mbps 21 dBm 20 dBm
HT20(MCS 0/8) 22 dBm 21 dBm
HT20(MCS 7/15) 21 dBm 19 dBm
HT40(MCS 0/8) 22 dBm 21 dBm
HT40(MCS 7/15) 21 dBm 19 dBm
VHT20(MCS 0) 22 dBm 21 dBm
VHT20(MCS 8) 20 dBm 18 dBm
VHT40(MCS 0) 22 dBm 21 dBm
VHT40(MCS 9) 20 dBm 18 dBm
VHT80(MCS0) 21 dBm
VHT80(MCS9) 18 dBm
HE20 (MCS0) 22 dBm 21 dBm
HE20 (MCS11) 20 dBm 17 dBm
HE40 (MCS0) 22 dBm 21 dBm
HE40 (MCS11) 20 dBm 17 dBm
HE80 (MCS0) 21 dBm
HE80 (MCS11) 17 dBm
Note: Maximum transmit power is limited by local regulatory settings

Power
• Maximum (worst case) power consumption:
¬ 64W (802.3bt Type4 PoE in) with ENET1 802.3at PSE enabled.
¬ 46W (802.3bt Type3 PoE) with ENET1 802.3af PSE enabled.
¬ 24W (802.3at) with disabled ENET1 PSE, USB.
• Maximum power consumption in idle mode:
¬ 10W
• Power over Ethernet (PoE):
¬ 48 V DC (nominal) 802.3bt/at compatible source

Mounting
• Hang mounting for AP1361 (Mount kit needs to be ordered separately)
• Pole/Wall mounting for AP1361D and AP1362 (Mount kit needs to be ordered separately)

Environmental
• Operating:
¬ Temperature: -40°C to 65°C (-40°F to +149°F)
¬ Humidity: 10% to 90% non-condensing
• Storage and transportation:
¬ Temperature: -40°C to +85°C (-40°F to +185°F)
• Wind resistance:
¬ Up to 100MPH sustained winds
¬ Up to 165MPH wind gusts

Dimensions/Weight
• Single AP excluding packing box and accessories:
¬ 243mm (W) x 243mm (D) x 85mm (H) -9.56” (W) x 9.56” (D) x 3.34” (H)
¬ 2500g / 5.51lb for AP1361 and AP1361D, 2684g / 5.91lb for AP1362
• Single AP including packing box and accessories:
¬ 320mm (W) x 300mm (D) x 135mm (H) -12.6” (W) x 11.81” (D) x 5.31”(H)
¬ 3121g / 6.88lb for AP1361 and AP1361D, 3286g / 7.24b for AP1362

Reliability
• MTBF: 1,003,257h (114.5 years) at +25ºC operating temperature

Capacity
• Up to 16 SSID per radio (total 32 SSID)
• Support for up to 1024 associated client devices

Software feature
• Up to 4K APs when managed by OV2500. No limit on number of AP groups
• Up to 255 APs per web managed (HTTP/ HTTPS) cluster
• Auto channel selection
• Auto transmit power control
• Bandwidth control per SSID
• L2 roaming
• L3 roaming with OmniVista 2500
• Captive portal (Internal/ External)
• Guest self-registration (optional SMS notification) with OmniVista 2500)
• Internal user database
• RADIUS client
• Guest social-login with OmniVista 2500
• RADIUS proxy authentication OmniVista 2500
• LDAP/AD proxy authentication OmniVista 2500
• Wireless QoS
• Band steering
• Client smart load balance
• Client sticky avoidance
• User behavior tracking
• White/black list
• Zero-touch provisioning (ZTP)
• NTP Client
• ACL
• DHCP/DNS/NAT
• Wireless MESH P2P/P2MP
• Wireless Bridge
• Rogue AP location and containment
• Dedicated Scanning AP
• System log report
• SSHv2
• SNMPv2
• Wireless attack detection with OmniVista 2500
• Floor plan and heat map with OmniVista 2500™
• Stanley Healthcare/Aeroscout RTLS support

IEEE standard • IEEE 802.11a/b/g/n/ac/ax
• IEEE 802.11e WMM, U-APSD
• IEEE 802.11h, 802.11i, 802.11e QoS
• IEEE 802.1Q (VLAN tagging)
• 802.11k Radio Resource Management
• 802.11v BSS Transition Management
• 802.11r Fast roaming

Regulatory & certification
• CB Scheme Safety, cTUVus
• Wi-Fi CERTIFIED Wi-Fi 6, Enhanced Open™, Passpoint®, Agile Multiband (MBO)
• FCC
• CE Marked
• Bluetooth SIG
• RoHS, REACH, WEEE
• ASTM B117-07A, Salt spray testing per UL50 NEMA 4x
• 2014/35/EU Low Voltage Directive
• 2014/30/EU EMC Directive
• 2011/65/EU RoHS Directive
• 2014/53/EU Radio Equipment Directive
• EN 55032
• IEC/EN 60950
• EN 300 328
• EN 301 893
• EN 301 489-1
• EN 301 489-17